Straight Barbed Joiner

Code	Size (Ø)	Quantity
016 OFK C16 000 K16	16 × 16 mm	1 pc
016 OFK C16 001 K16	20 × 20 mm	1 pc

Категория: Accessories

The straight barbed joiner is an inline connection fitting engineered to facilitate the direct, coaxial coupling of two flexible hoses or blank drip tubing segments along a straight layout line. The primary operational advantage of this model is its maximum installation simplicity and deployment speed: the flexible hose is simply pushed onto the multi-tiered barbed insert. Precision-machined, cone-shaped structural barbs firmly bite into the internal wall of the tubing from within, preventing the line from slipping or blowing off under continuous hydraulic working pressure.

The fitting is manufactured from premium, high-density black polymer matrix characterized by exceptional elasticity and tensile strength. It exhibits absolute resistance to wide seasonal temperature fluctuations and prolonged direct solar UV radiation. Its ultra-compact, streamlined profile keeps it practically invisible along the active watering lateral line.

Type: Straight inline flow connector (barb-to-barb push-on interface)
Material: UV-stabilized, high-grade virgin technical polymer
Sizing matrix: 16 × 16 mm; 20 × 20 mm
Key design features: Equipped with a reinforced structural center collar flange to provide a high-friction finger grip area during manual push-on field assembly

This push-on barbed joiner is ideally configured for cost-effective deployment within private commercial gardens, mid-scale agricultural plots, smallholder farm networks, and small-scale greenhouse arrays. Primary Operational Objectives: Pipeline Extension: Linking short or fragmented lateral lines directly from multiple tubing coils to establish extended continuous watering runs. Rapid On-Site Remediation: Instantaneously restoring system functionality following accidental field damage to the lateral line caused by hand tools or mechanical weeding cultivators. Cost Optimization: Serving as an ultra-budget, high-efficiency mechanical junction method for flexible tubing grids operating under low-to-medium hydraulic pressure thresholds.